Motoriding

Archive for January, 2010

All About ATV Lift Kits

Sometimes there is need to raise your ATV even just a fraction away from the ground. It could be a much too rocky terrain that keeps banging on the ATVs underside or your ATV is way too lowered and you need to pass a stretch of a watery trail. Either way you need ATV lift kits to get the work done.

ATV lift kits are sets of bolts and braces that are designed to adjust your ATV and gain more ground clearance. ATV lift kits have an average of 2 inch lift. They are also easy boltonbracket system that you can easily install while on the road.

There are several kinds of ATV lift kits available most of them designed for a specific machine so it isnt chooseyourpreference exercise. You should consider your vehicle type and the manufacturers stock suspension. You should consider too the existing lift your ATV tires allow on your vehicle and decide how much lift you need installed. You need to balance the overall existing conditions of your ATV and the lift youre going to install if theres a working harmony between them. Remember the higher your ATV is from the ground the higher too will be its center of gravity. This in turn will heighten the risk of your ATV of overturning.

Besides terrain conditions ATV lift kits are also used to enhance an ATVs working condition. Here are some samples of ATV lift kits and how it is employed to enhance performance.

ATV Lift Kit used: Kawasaki Mule Lift System
Applies on all Mules Kawasaki

This lift system provides 2″ lift while improving the suspensions of the mule. The kit replaces the front coils increasing the non cab model spring rate by 15 and the cab model by 35. Spacers for the struts complete the front lift. The rear lift is achieved using extended length shackles which provide extra clearance.

The improvement would allow a greater load limit than without the enhancement. Since the overall load capabilities have improved the work capabilities for this machine has proportionally improved.

ATV Lift Kit used: Honda Lift Systems
Applies on: TRX350 0004 TRX400 AT 0405 TRX400 9193 TRX450 9805 TRX500 0205 TRX650 0304

This 2 inch lift system enhances the bikes handling performance and stability by making modifications to the stock geometry. The design will be a large factor in stabilizing the bikes suspension and make it more sure footed over rough terrain.

This installation allows more stability in rough terrain. If used in junction with large and wide set of tires rest assured all rides will be comfortable.

About the writer:  For more free articles and information or to view a selection of car and truck articles and information and SUV articles and information visit Articles.net.au Your source for free Articles Information and Website Content.

A Hazardous Sport. Be Prepared!

Quality motorcycle gear combines comfort style fit durability weather protection and armor. The bottom line with equipment is you WILL eventually fall and when you do you will most likely become very close friends with the pavement. So you need the “maximum impact and abrasion resistance” as possible.

Armor is extra padding sewn into the jacket or pants to cushion likely spots of impact. Road rash is the not so fun part about riding a motorcycle. It is painful and bloody but impacts can cause serious and sometimes fatal internal damage. So shoulders elbows buttocks and knees are spots that you want to be well protected as they are the most common of impact points. In any serious crash it isnt hard to get a bruise on all of these body locations. Other common regions of impact are the chest back and collar bone. So as you can see armor placement is crucial.

Material used for armor is another major concern. They are usually composites of plastic and foam. Simple plastic plates would slash through the material and expose you to injury so they put hard plastic plates inside a thick layer of firm foam. Some garments also have built in spine protectors. If not however and you feel that you are not properly protected jacket liners with armor pads are available for purchase which are called body guard jackets.

For the most part jackets off the rack consist of small medium large and extra large. But there is more to a well fitting jacket than that. Your protection depends on how well your equipment fits. If you luck out and find a jacket that you like and fits well off the rack youre in business. But if you dont you can order custom made leathers. There is 5 companies worldwide that can do your custom fit; Langlitz Bates Z Custom Leather Vanson and Aerostitch. But dont expect to order up your jacket and have it in a week. Each company can only produce about 1600 custom jackets per year so there is a waiting list as long as the dictionary. So make sure you place your order well before you need to ride or you could be hooped.

About the writer:  web and graphic designer who takes a holistic approach to all aspects of health and well being who has a desire for good design and loves a good read

A Guide To Motorbike Helmets

There are still many states that leave the option of wearing helmets to you. If you have a motorbike or you are planning to buy then Motorbike Helmet is very much necessary. In several parts of the world it is legal obligation for buying it. There are some safety precautions that you have to follow when you do some activities and riding motorcycles at slow speeds is obviously one of the precautions. It is risky riding your motorcycle without using helmet and driving car without using seat belt. Your life is precious but many lives are lost because of ignorant riders thinking that accidents will never happen to them. When you go to motorcycle accessories then you might be confused by seeing wide range of helmets.

There are 4 several types of motorbike helmets available. The first is full face helmet which is ideal for persons who require better protection. These helmets provide full cover to your face along hinged visor. The full face helmets are perfect for providing from elements. It also provides great protection when an accident happens.

The open face motorbike helmet provides lower degree of protection. You can find that it will not provide protection to your chin. It is usually worn including goggles or visor that depends on the rider preference. It provides the rider feel more exposed therefore it is preferred for those looking for having freedom in riding experience.

The flip up helmets are usually a compromise between protection and exposure. This permits you to talk with other people easily if you are wearing helmet. There are lots of off road helmets available. These are used for taking part in motocross and other sports. These 4 types of helmets are available in USA and many countries. Some aspects are significant for considering while selecting your helmets. Some bikers believe in softer polycarbonate DOT only authorized helmets that allow higher degree of protection. The principle is that the strong snell rated helmets in reality provide more impact for your head although the DOT approved helmets follow light criterion and has few flexibility for assimilating the stock.

Selecting the correct helmet will be easy if it is a plain thing for choosing its size and colour. The other models or ever assorted brands inside equal brand mark could get assorted fell and fit and price doesn’t depend on it because few cheapest helmets will fell and fit fine than costlier helmets. Lot of motorcyclists will not recognize that apart from size motorbike helmets get into assortment of several internal forms. Shape is the important aspect to consider while buying helmet. Helmets are costly and if you want to buy one it should be of good quality nice fitting and should be within your budget. Today people are buying online without checking that helmet is better or not. It takes about 60 minutes of riding for ascertaining that motorbike helmet would give satisfactory comfort level. The bottom line is wearing a helmet is a must for all motorbike riders.

About the writer:  Froilan Ong is an independent home based business owner and internet marketeer. He was in food and beverage sales for the past 18 years and also works as a sales manager for one of the largest green tea manufacturer in the world. He’s now involved in several home based business and works at home.